4️⃣Configure Video & Audio
Configure Video & Audio via IPCManager
Double click the IP Camera you would like to set;
Enter "User Name" (admin by default) and "Password" (12345 by default), then click "Login":
Click "Encoder" -->Video Encoder;
Key Frame set as 10 (Reference Value: users can set lower key frame if better image quality is required.);
Bitrate set as 500 (Reference Value: users can set higher bit rate to remove mosaic but it should be matched to your network bandwidth because of uplink bandwidth used.);
Check Audio Codec-->Click checkbox of Enable to enable Audio;
Encode set as AAC for audio; Input volume set as 39 or so (Reference Value: users can log into GUI and set sampling rate as 24000 or higher if better voice quality is required because the default sampling rate here is 8000.)
Click "Save"
Last updated