> For the complete documentation index, see [llms.txt](https://docs.jtokenapp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.jtokenapp.com/live-camera/getting-started/quick-start-via-ipcmanager/configure-video-and-audio.md).

# 4️⃣Configure Video & Audio

## Configure Video & Audio via IPCManager

* Double click the IP Camera you would like to set; 
* Enter "User Name" (admin by default) and "Password" (12345 by default), then click "Login":

![Access IP Camera](/files/-MTnjv74Fk3WVJzZ_n8j)

* Click "Encoder" -->Video Encoder; 
* Key Frame set as 10 (Reference Value: users can set lower key frame if better image quality is required.); 
* Bitrate set as 500 (Reference Value: users can set higher bit rate to remove mosaic but it should be matched to your network bandwidth because of uplink bandwidth used.); 
* Check Audio Codec-->Click checkbox of Enable to enable Audio; 
* Encode set as AAC for audio; Input volume set as 39 or so (Reference Value: users can log into GUI and set sampling rate as 24000 or higher if better voice quality is required because the default sampling rate here is 8000.) 
* Click "Save"

![](/files/-MTnkmOy4pPiZJ0PRMBX)