LogoLogo
Network Camera
Network Camera
  • About JTOKEN
  • 📌Getting Started
    • Introduction
    • Quick Start via UI
      • 1️⃣Connection Diagram
      • 2️⃣Download & Install
      • 3️⃣Configure IP
      • 4️⃣Access Camera
      • 5️⃣Adjust Focus
      • 6️⃣Configure Audio
      • 7️⃣Configure Video
      • 8️⃣Configure RTMP
    • Quick Start via IPCManager
      • 1️⃣Connection Diagram
      • 2️⃣Download & Install
      • 3️⃣Configure IP
      • 4️⃣Configure Video & Audio
      • 5️⃣Configure RTMP
      • 6️⃣Configure WiFi
  • 🔧TOOLS
    • IPCManager
      • Download
      • Quick Start
    • ActiveX
  • 📷Live View
    • Live View
    • PTZ Control
    • Image Settings
    • Video Settings
    • Function Bars
  • 🎞Playback
    • Playback
  • ⚙Configuration
    • Basic Settings
    • System
      • General
      • Date & Time
      • Auto Maintain
      • Upgrade
      • Information
      • Log
    • Network
      • TCP/IP
        • Network Status
        • TCP/IP
      • Port
      • WIFI
      • PPPoE
      • SMTP
      • UPnP
      • DDNS
      • RTSP
      • RTMP
      • VoIP
      • SNMP
      • IEEE 802.1x
    • Video & Audio
      • Audio
      • Video
      • Snapshot
      • OSD
      • Image Settings
        • Image
        • Schedule
        • Day/Night
      • Privacy Mask
      • ROI
    • Storage
      • Local Settings
      • Disk
      • FTP
      • NFS
      • Schedule
        • Record
        • Snapshot
        • FTP Upload
    • Event
      • Event Server
      • Motion Detection
        • Detection Zone
        • Schedule
        • Action
      • Human Detection
        • Basic Settings
        • Schedule
        • Action
      • Line-Crossing Detection
        • Basic Settings
        • Schedule
        • Action
      • Intrusion Detection
        • Basic Settings
        • Schedule
        • Action
      • I/O Alarm
        • I/O Alarm
        • Schedule
        • Action
      • PIR
        • Schedule
        • Action
      • Abnormality
        • Network Disconnection
        • Device Startup
    • Security
      • Manage Users
      • IP Filter
  • 📤Upgrade
    • Upgrade Firmware
  • 🎆Resources
    • FAQ
      • IE
      • Network
        • TCP/IP
        • RTMP
      • IR
    • Official Store
    • YouTube Channel
  • 🎨Application
    • YouTube
    • Twitch
  • integration
    • Postman
Powered by GitBook
On this page
  • IP Filter
  • Explanation
  1. ⚙Configuration
  2. Security

IP Filter

PreviousManage UsersNextUpgrade Firmware

Last updated 3 years ago

IP Filter

  • Go to Configuration->Security->IP Filter

This screen allows for the filtering of IP addresses, either blocking them, or granting them access to the camera. This feature helps make the camera more secure by limiting remote access only to approved users. Below is a screenshot of the IP Filter screen.

Explanation

  • Enable: This checkbox allows the user to enable the IP Filter feature for trusted IP address.

  • IP address filter type: This dropdown box allows the user to select the type of the IP filtering: Forbidden or Allowed.

  • Add: This button allows the user to add one filtering rule.

  • Modify: This button allows the user to modify one filtering rule in the table.

  • Delete: This button allows the user to delete one filter rule in the table.

  • Start IP: This column shows the starting IP address which will be filtered.

  • End IP: This column shows the end IP address which will be filtered.

  • Alias: This column shows the rule’s name the user defined.