# Action

## Action

* Go to Configuration->Event->Motion Detection->Action

This tab allows the user to modify detection action settings. Below is a screenshot of action settings tab.

![](https://824918362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MP7R1h0_1N0Otx2B4xV%2F-MSu9Qpi0Dmc3yqz0EUk%2F-MSu9hyJRB71KnpwMvEG%2FIPC_EventMotionAction.png?alt=media\&token=ff99efa9-a6f7-4040-bfe8-3befdb4326b5)

## Explanation

* **Alarm output**: This checkbox allows the user to enable the camera to send the alarm notification output when a motion detection alarm is triggered. 
* **Record**: This checkbox allows the user to enable the camera to record video when a motion detection alarm is triggered. 
* **FTP**: This checkbox allows the user to enable the camera to upload the video and snapshot to the FTP server when a motion detection alarm is triggered. 
* **Send Email**: This checkbox allows the user to enable the camera to send an email when a motion detection alarm is triggered. 
* **Snapshot**: This checkbox allows the user to enable the camera to take a snapshot when a motion detection alarm is triggered. 
* **Audio out**: This checkbox allows the user to enable the camera to activate speaker sounds when a motion detection alarm is triggered. 
* **Notify the event server**: This checkbox allows the user to enable the camera to send the alarm notification to the specified event server when a motion detection alarm is triggered. 
* **Restore Default**: Restore the values to default setting. 
* **Refresh**: Refresh the display of the settings’ value. 
* **Save**: Save the settings.