> For the complete documentation index, see [llms.txt](https://docs.jtokenapp.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.jtokenapp.com/live-camera/configuration/network/upnp.md).

# UPnP

## UPnP

* Go to Configuration->Network->UPnP

The UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the Internet. It allows the camera to connect to the router in an easy manner to quickly allow for remote access. Below is a screenshot of the UPnP settings screen:

![UPnP](/files/-MSNAtWmkDpijY2BG0zD)

## Explanation

This table is used to show how the ports for each protocol listed below have been remapped by the UPnP protocol.

* **Internal Port** shows the Internal Port used by that service to establish communication from the router to the camera. 
* **External Port** shows the External Port used by that service to establish communication from the router to the internet. 
* **Protocol** shows the name of the protocol used by that service. 
* **Enable** shows if to enable the corresponding service on the table. 
* **Status** shows the status of the protocol. If the protocol was mapped successfully, this field will say “Mapping Succeeded”. 
* **Add**: Add more port mapping. 
* **Modify**: Modify existing port mapping 
* **Delete**: Delete the port mapping from the list.

## Setting

To see how to setup the camera for remote access, see below photo:

![](/files/-MSNBzFEn_LzQNvCMgB9)