# Device Startup

## Device Startup

* Go to Configuration->Event->Abnormality->Device Startup

This tab allows the user to set the camera’s response to a Device start up related abnormality. Below is a screenshot of the Device startup tab screen:

![](https://824918362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MP7R1h0_1N0Otx2B4xV%2F-MSuN355Cqa4m6ecJ-xJ%2F-MSuNW4HUkJ93mi1WrKE%2FIPC_EventAbDevice.png?alt=media\&token=06c30d8d-3901-488d-a674-fcbcbfb6b550)

## Explanation

* **Alarm output**: This checkbox allows the user to enable the camera to send the alarm notification output when a motion detection alarm is triggered. 
* **Record**: This checkbox allows the user to enable the camera to record video when a motion detection alarm is triggered. 
* **FTP**: This checkbox allows the user to enable the camera to upload the video and snapshot to the FTP server when a motion detection alarm is triggered. 
* **Send Email**: This checkbox allows the user to enable the camera to send an email when a motion detection alarm is triggered. 
* **Snapshot**: This checkbox allows the user to enable the camera to take a snapshot when a motion detection alarm is triggered. 
* **Audio out**: This checkbox allows the user to enable the camera to activate speaker sounds when a motion detection alarm is triggered. 
* **Notify the event server**: This checkbox allows the user to enable the camera to send the alarm notification to the specified event server when a motion detection alarm is triggered. 
* **Restore Default**: Restore the values to default setting. 
* **Refresh**: Refresh the display of the settings’ value. 
* **Save**: Save the settings.