WIFI
Only Available for WiFi Encoders
Configure WiFi
Go to Setting-->Network-->WiFi-->Double Click Trusted SSID
Enter correct password to SSID and Click “Save”
Refresh and Link Status will be shown “Connected” below which means it’s already connected to WiFi. If disconnected, please try it again or check whether MAC address of this encoder is in the whitelist of your router.
![](https://docs.jtokenapp.com/~gitbook/image?url=https%3A%2F%2F2754774125-files.gitbook.io%2F%7E%2Ffiles%2Fv0%2Fb%2Fgitbook-x-prod.appspot.com%2Fo%2Fspaces%252FOhz3fkychFBZheakuBET%252Fuploads%252FhHGh38S24gRvIiUME3q1%252FENCPro_NW_WIFI.png%3Falt%3Dmedia%26token%3D8b42ce7e-0485-47e8-9278-800b19fed80c&width=768&dpr=4&quality=100&sign=1657cc55&sv=1)
🧙♂️ Tips:
The name of SSID can only include numbers and letters in English, or it might cause the failure of connection.
It's necessary to plug out the ethernet cable and power off the encoder to reboot it to make WiFi valid.
You can read more about FAQ for WIFI:
WIFILast updated