# WIFI

## Configure WiFi

* Go to Setting-->Network-->WiFi-->Double Click Trusted SSID 
* Enter correct password to SSID and Click “Save” 
* Refresh and Link Status will be shown “Connected” below which means it’s already connected to WiFi. If disconnected, please try it again or check whether MAC address of this encoder is in the whitelist of your router.

![](/files/fx1qFUvvCLfgssQBNX0C)

{% hint style="info" %}
:man\_mage: **Tips**: 

1. The name of SSID can only include numbers and letters in English, or it might cause the failure of connection.
2. It's necessary to plug out the ethernet cable and power off the encoder to reboot it to make WiFi valid.
   {% endhint %}

**You can read more about FAQ for WIFI**:

{% content-ref url="/pages/-MPxKOo3dssxSOQ\_nc02" %}
[WIFI](/video-encoder-pro/resources/faq/network/wifi.md)
{% endcontent-ref %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.jtokenapp.com/video-encoder-pro/setting/network/wifi.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.