Display Dongle

Smartphone Mirroring

Only Receiver Required

Connection Diagram

  • Power on the receiver and get it connected to the display/monitor via HDMI cable, switch on the power and you will see the below home page:

NOTE: The screenshot is taken from the encoder when streaming.

Android

  • Take out the android phone, go to Setting->WLAN->Search the above Wi-Fi hotspot "YOMIPAPA_E84E06"->Enter default password "12345678" to connect it;

NOTE: The default frequency band of Wi-Fi is 5.8GHz, then it's necessary to confirm whether it's available for your smartphone or not, or else the Wi-Fi hotspot won't be shown on the smartphone.

  • Once connected, then tab the icon "Wireless Projection" and find the device to tab it:

  • Then the below image of your Android will be shown vertically on the display/monitor:

  • Play the video horizontally, it will show as below:

NOTE: At this moment, the smartphone cannot be connected to the Internet. In this case, it's necessary to make the receiver connected to Wi-Fi hotspot of your local network, please click Internet Connection for details.

iPhone

  • Take out the android phone, go to Setting->WLAN->Search the above Wi-Fi hotspot "YOMIPAPA_E84E06"->Enter default password "12345678" to connect it;

  • Once connected, then tab the icon "Screen Mirroring" and find the device to tab it:

  • Then the below image of your iPhone will be shown vertically on the display/monitor:

  • Play the video horizontally, it will show as below:

NOTE: At this moment, the smartphone cannot be connected to the Internet. In this case, it's necessary to make the receiver connected to Wi-Fi hotspot of your local network, please click Internet Connection for details.

PreviousComputer MirroringNextInternet Connection

Last updated