# 6️⃣Configure WiFi

## Configure Wireless Connection

* Go to WIFI-->Enable-->Double click trusted SSID; 
* Enter password to the SSID you select above; 
* Enter correct password to SSID and Click "Connect"

![](https://824918362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MP7R1h0_1N0Otx2B4xV%2F-MTnlahwxAsCrNHAEmNz%2F-MTnm5ilONJYzKZ6Xli2%2FIPCManager_WiFi.jpg?alt=media\&token=b7d8ee72-3cde-474f-9786-e69d37690c71)

* Refresh and Current Network will be shown "Connected" below which means it's already connected to WiFi. If disconnected, please try it again or check whether MAC address of this IP camera is in the whitelist of your router.

![](https://824918362-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-MP7R1h0_1N0Otx2B4xV%2F-MTnlahwxAsCrNHAEmNz%2F-MTnmMnsafRKX-wwe2st%2FIPCManager_WiFiConnected.jpg?alt=media\&token=f4d8bd98-4a50-4332-9802-d9e2e74a1c7f)

{% hint style="info" %}
:man\_mage: **Tips**: It's necessary to plug out the ethernet cable and power off the IP camera to reboot it to make WiFi valid.
{% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.jtokenapp.com/live-camera/getting-started/quick-start-via-ipcmanager/configure-wifi.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.