LogoLogo
ROUTER EX6
ROUTER EX6
  • About JTOKEN
  • 📌Getting Started
    • Introduction
    • Specification
    • Interfaces
    • Quick Start
  • ✨Configuration
    • Home
    • System Info
      • Clients Info
      • Statistics
      • 5G/WAN Status
    • Wireless Setting
      • WIFI Basic Setting
      • WIFI Repeater Setting
    • Network Setting
      • WAN Setting
      • LAN Setting
      • DHCP Setting
      • 5G Setting
      • VPN Setting
      • Ping Reboot
    • System Admin
      • Web Access Control
      • Backup/Restore
      • Firmware Upgrade
      • Time Setting
      • Reboot
    • Advance Setting
      • DTU Setting
      • DMZ Setting
      • Port Mapping
      • Static Route
      • Remote Help
  • 📤Upgrade
    • Download Firmware
    • Upgrade Firmware
  • Resources
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  • Connection
  • Configure IP for PC
  • Connected to WiFi
  • Confirm whether PC is well connected to the router
  • Access router from browser
  1. Getting Started

Quick Start

CONNECTING TO 5G/4G NETWORK

PreviousInterfacesNextHome

Last updated 3 years ago

Connection

  • Correctly insert SIM card and power on the router with DC12V adapter.

Configure IP for PC

  • Before accessing the router from browsers, it’s recommended for you to set your PC as “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then it will get an IP address automatically by router. If you would like to set one assigned address for your PC, it’s necessary to set it in the same network segment of LAN0 of router (the default IP address for LAN0: 192.168.11.1, subnet mask: 255.255.255.0).

Connected to WiFi

  • Check whether there’s WiFi hotspot started with WIFI6-2.4G-XXXX and WIFI6-5.8G-XXXX, then click “connect” and enter password (12345678 by default) to establish wireless connection:

Confirm whether PC is well connected to the router

  • After obtaining IP address, please execute PING command to double confirm whether PC is well connected to the router. Take Windows as example: WIN+R ->Enter “cmd” -> Enter “ping 192.168.11.1”, if it’s shown like the below photo, then it means the PC is well connected to the router:

Access router from browser

  • Start a browser like Chrome, Firefox, Edge etc.

  • Enter username and password (admin by default) and it’s shown as below:

  • After login, you will be able to configure and manage this router.

Enter in the address column

📌
http://192.168.11.1