# DTU Setting

### DTU Setting

In this section, it allows the user to set the DTU by yourself. Please check below details:

![](https://1469430051-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F6PRGZthRkc3QRZObicDT%2Fuploads%2FVkXHv77zlAbgflbh5bOQ%2FX6_AdvanceS_DTU_RS485.jpg?alt=media\&token=7534f086-40d3-4854-8f23-384683d20348)

### Explanation

| Item             | Description                        |
| ---------------- | ---------------------------------- |
| Enable           | Check the checkbox to enable       |
| Mode             | TCP Client                         |
| IP               | IP address of target server        |
| Port             | Port of target server              |
| Device           | Serial port, /dev/ttyS1 by default |
| Baud rate        | Select corresponding baud rate     |
| Parity           | Current status of parity           |
| Stop Bit         | Current stop bit situation         |
| Data Bit         | Length of data bit                 |
| Heartbeat Packet | Enable or disable heartbeat        |