LogoLogo
ROUTER EX2
Video EncoderVideo Encoder ProNetwork Camera4K Extender1080P ExtenderDisplay DongleLTE DongleROUTER EX2ROUTER EX6ROUTER V519ROUTER V520S
ROUTER EX2
Video EncoderVideo Encoder ProNetwork Camera4K Extender1080P ExtenderDisplay DongleLTE DongleROUTER EX2ROUTER EX6ROUTER V519ROUTER V520S
  • About JTOKEN
  • đź“ŚGETTING STARTED
    • Introduction
    • Specification
    • Interfaces
    • Quick Start
  • ✨CONFIGURATION
    • Home
    • System Info
      • Clients info
      • Statistics
      • 4G/WAN Status
    • Wireless Setting
      • 2.4G Basic Setting
      • 2.4G Repeater
    • Network Setting
      • Work Mode Setting
      • WAN Setting
      • LAN Setting
      • DHCP Setting
      • 4G Setting
      • VPN Setting
      • Ping Reboot
    • System Admin
      • Web Access Control
      • Backup/Restore
      • Firmware upgrade
      • Time Setting
      • Reboot
      • System Log
    • Advance Setting
      • Intranet Passthrough
      • Oray Passthrough
      • DTU Setting
      • PLC Setting
      • Zerotier
      • Remote Help
      • DMZ Setting
      • Port Mapping
      • Static Route
      • MQTT
  • 🎆RESOURCES
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  • Connection
  • Configure IP for PC
  • Connected to WiFi
  • Confirm whether PC is well connected to the router
  • Access router from browser
  1. GETTING STARTED

Quick Start

PreviousInterfacesNextHome

Last updated 2 years ago

Connection

  • Correctly insert SIM card and power on the router with DC12V adapter.

Configure IP for PC

  • Before accessing the router from browsers, it’s recommended for you to set your PC as “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then it will get an IP address automatically by router. If you would like to set one assigned address for your PC, it’s necessary to set it in the same network segment of LAN0 of router (the default IP address for LAN0: 192.168.11.1, subnet mask: 255.255.255.0).

Connected to WiFi

  • Check whether there’s WiFi hotspot started with IOT-XXXX(SSID), then click “connect” and enter password (12345678 by default) to establish wireless connection

Confirm whether PC is well connected to the router

  • After obtaining IP address, please execute PING command to double confirm whether PC is well connected to the router. Take Windows as example: WIN+R ->Enter “cmd” -> Enter “ping 192.168.11.1”, if it’s shown like the below photo, then it means the PC is well connected to the router:

Access router from browser

  • Start a browser like Chrome, Firefox, Edge etc.

  • Enter http://192.168.11.1 in the address column

  • Enter username and password (admin by default) and it’s shown as below:

  • After login, you will be able to configure and manage this router

đź“Ś