LogoLogo
ROUTER EX2
ROUTER EX2
  • About JTOKEN
  • 📌GETTING STARTED
    • Introduction
    • Specification
    • Interfaces
    • Quick Start
  • ✨CONFIGURATION
    • Home
    • System Info
      • Clients info
      • Statistics
      • 4G/WAN Status
    • Wireless Setting
      • 2.4G Basic Setting
      • 2.4G Repeater
    • Network Setting
      • Work Mode Setting
      • WAN Setting
      • LAN Setting
      • DHCP Setting
      • 4G Setting
      • VPN Setting
      • Ping Reboot
    • System Admin
      • Web Access Control
      • Backup/Restore
      • Firmware upgrade
      • Time Setting
      • Reboot
      • System Log
    • Advance Setting
      • Intranet Passthrough
      • Oray Passthrough
      • DTU Setting
      • PLC Setting
      • Zerotier
      • Remote Help
      • DMZ Setting
      • Port Mapping
      • Static Route
      • MQTT
  • 🎆RESOURCES
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  • 2.4G Repeater
  • Explanation
  1. CONFIGURATION
  2. Wireless Setting

2.4G Repeater

Previous2.4G Basic SettingNextNetwork Setting

Last updated 3 years ago

2.4G Repeater

  • Go to Wireless Setting->2.4G Repeater Setting->Then it allows the user to setup whether it's need to use it as one repeater by connecting to another router. Click "Scan" and all available Wi-Fi hotspot will be shown in the list. Please check below for details:

Explanation

Item
Description

Enable Repeater

Check the checkbox to enable or disable

Connect Status

Connected or Not connected

Protocol

DHCP or Static IP

SSID

Enter the SSID you'd like to connect

Password

Enter password related to the above SSID

Scan

Click to search the available SSID

✨