LogoLogo
ROUTER EX2
ROUTER EX2
  • About JTOKEN
  • 📌GETTING STARTED
    • Introduction
    • Specification
    • Interfaces
    • Quick Start
  • ✨CONFIGURATION
    • Home
    • System Info
      • Clients info
      • Statistics
      • 4G/WAN Status
    • Wireless Setting
      • 2.4G Basic Setting
      • 2.4G Repeater
    • Network Setting
      • Work Mode Setting
      • WAN Setting
      • LAN Setting
      • DHCP Setting
      • 4G Setting
      • VPN Setting
      • Ping Reboot
    • System Admin
      • Web Access Control
      • Backup/Restore
      • Firmware upgrade
      • Time Setting
      • Reboot
      • System Log
    • Advance Setting
      • Intranet Passthrough
      • Oray Passthrough
      • DTU Setting
      • PLC Setting
      • Zerotier
      • Remote Help
      • DMZ Setting
      • Port Mapping
      • Static Route
      • MQTT
  • 🎆RESOURCES
    • FAQ
    • Official Store
    • YouTube Channel
Powered by GitBook
On this page
  • DTU Setting
  • Explanation
  1. CONFIGURATION
  2. Advance Setting

DTU Setting

PreviousOray PassthroughNextPLC Setting

Last updated 3 years ago

DTU Setting

In this section, it allows the user to set the DTU by yourself. Please check below details:

Explanation

Item
Description

Enable

Check the checkbox to enable

Mode

TCP Client

IP

IP address of target server

Port

Port of target server

Device

Serial port, /dev/ttyS0 by default

Baud rate

Select corresponding baud rate

Parity

Current status of parity

Stop Bit

Current stop bit situation

Data Bit

Length of data bit

Heartbeat Packet

Enable or disable heartbeat

✨